Divot: Bare Fibre Adaptor
The Divot™ Bare Fibre Adapter (Alignment Device) accepts cleaved and non-cleaved fibre, requires only 20mm of bare fibre exposed and has a typical insertion loss of less than 0.5 dB when using cleaved fibre. No messy gel applicators or reservoirs to fill. Simply strip your fibre and insert.
Designed to quickly connect to unterminated (bare fibre) for testing, servicing or communication requirements. The Divot™ device is ready to use right out of the box. All you have to do is connect the patch cable to your test equipment and insert bare fiber into the end of the Divot™ module. Preparation of the bare fiber is easy. Simply strip and clean a few inches of fiber down to 125uM cladding, leaving approximately 3/4” of bare fibre exposed. Insert the bare fibre into the Divot™ module until it stops. Connections are suitable for many testing applications with results similar to a standard terminated piece of fibre.
The Divot™ Bare Fibre Adapter (Alignment Device) accepts cleaved and non-cleaved fibre, requires only 20mm of bare fibre exposed and has a typical insertion loss of less than 0.5 dB when using cleaved fibre. No messy gel applicators or reservoirs to fill. Simply strip your fibre and insert.
Designed to quickly connect to unterminated (bare fibre) for testing, servicing or communication requirements. The Divot™ device is ready to use right out of the box. All you have to do is connect the patch cable to your test equipment and insert bare fiber into the end of the Divot™ module. Preparation of the bare fiber is easy. Simply strip and clean a few inches of fiber down to 125uM cladding, leaving approximately 3/4” of bare fibre exposed. Insert the bare fibre into the Divot™ module until it stops. Connections are suitable for many testing applications with results similar to a standard terminated piece of fibre.
The Divot™ Bare Fibre Adapter (Alignment Device) accepts cleaved and non-cleaved fibre, requires only 20mm of bare fibre exposed and has a typical insertion loss of less than 0.5 dB when using cleaved fibre. No messy gel applicators or reservoirs to fill. Simply strip your fibre and insert.
Designed to quickly connect to unterminated (bare fibre) for testing, servicing or communication requirements. The Divot™ device is ready to use right out of the box. All you have to do is connect the patch cable to your test equipment and insert bare fiber into the end of the Divot™ module. Preparation of the bare fiber is easy. Simply strip and clean a few inches of fiber down to 125uM cladding, leaving approximately 3/4” of bare fibre exposed. Insert the bare fibre into the Divot™ module until it stops. Connections are suitable for many testing applications with results similar to a standard terminated piece of fibre.
